Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Ford Ranger

Step-by-Step Programming Instructions:

To program the key portion, you’ll first need to have the key cut by a locksmith and ensure you already possess two working keys. If you only have one working key, a locksmith will need to program a second key using specialized equipment. Here’s how to program the key portion:

1. Insert one of the existing working keys into the ignition cylinder.
2. Turn the ignition cylinder to the ON (RUN) position, and then back to OFF.
3. Remove the existing working key, and within five seconds, insert a second working key. Turn it to the ON (RUN) position, then back to OFF.
4. Remove the second working key and quickly insert the new key before ten seconds have elapsed. Turn it to the ON (RUN) position, leaving it on for one second, then turn it back to OFF.
5. The security light will illuminate for three seconds, indicating that the new key has been successfully programmed. Note: This process only programs the remote portion of the key/remote.

For programming the remote portion:

1. Close all doors, then open the driver’s door. Press the UNLOCK button on the driver’s door panel while keeping the door open, and insert the key into the ignition.
2. Turn the ignition from OFF to RUN eight times within ten seconds, with the eighth turn ending in the RUN position. The door locks will cycle to confirm entry into programming mode.
3. Within 20 seconds, press any button on the first keyless remote. The door locks will cycle again to confirm programming.
4. Within 20 seconds, press any button on the second keyless remote. The door locks will cycle once more to confirm programming.
5. Turn the ignition to OFF. The locks will cycle to indicate the end of the programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Ford Ranger