Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Cadillac SRX

Step-by-Step Programming Instructions:

To add a new remote when you have one programmed remote or when you have no working remotes, follow these steps:

For adding a new remote with one programmed remote:

1. Ensure the vehicle is turned off.
2. Place the existing remote(s) in the cupholder and keep the new remote with you.
3. Insert the key into the key lock cylinder on the outside of the driver’s door.
4. Turn the key to the unlock position five times within ten seconds.
5. The Driver Information Center (DIC) will display “Ready to Learn Electronic key #2, 3, 4 ETC.”
6. Place the new remote into the transmitter pocket inside the center console, ensuring the buttons face the front of the vehicle. (Access the transmitter pocket by opening the storage area and lifting the tray).
7. Start the ignition. Once the remote is learned, the DIC will indicate readiness to program the next remote.
8. Remove the remote from the transmitter pocket and press the unlock button.
9. Repeat Steps 6 through 8 to program additional remotes.
10. Once all additional transmitters are programmed, press and hold the ignition for ten seconds to exit programming mode.

For programming a new remote with no working remotes:

1. Ensure the vehicle is turned off.
2. Insert the key into the key lock cylinder on the outside of the driver’s door.
3. Turn the key to the unlock position five times within ten seconds.
4. The DIC will display “REMOTE LEARN PENDING, PLEASE WAIT.”
5. Wait for ten minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press the ignition. The DIC will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
6. Repeat Step 5 two additional times. After the third time, all previously known remotes will no longer work with the vehicle. The DIC will now show “READY FOR REMOTE #1.”
7. Place the new remote into the transmitter pocket inside the center console, ensuring the buttons face the front of the vehicle.
8. Start the ignition. Once the remote is learned, the DIC will display readiness to program the next remote.
9. Remove the remote from the transmitter pocket and press the unlock button.
10. Repeat Steps 7 through 9 to program additional remotes.
11. Once all additional transmitters are programmed, press and hold the ignition for ten seconds to exit programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Cadillac SRX