Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Montana

Step-by-Step Programming Instructions:

1. Take out the key from the ignition.
2. Locate and remove the “BCMPRGRM” fuse from the fuse panel, accessible by opening the front passenger door. Use the fuse panel legend to find the correct fuse.
3. Close all doors.
4. Close the liftgate.
5. Insert keys into the ignition, turning the ignition lock cylinder to ACC (one click towards you, opposite direction from starting the engine).
6. Turn the ignition lock cylinder to OFF, then back to ACC within 1 second.
7. Open and close any vehicle door. A chime indicates the system has entered programming mode.
8. Press and hold both the transmitter LOCK and UNLOCK buttons simultaneously for 14 seconds. Note: After 7 seconds, a chime may confirm successful synchronization. Wait about 14 seconds for a second chime, confirming successful programming. Your new remote is now accepted, and all existing remote codes are erased.
9. Repeat the previous step for each additional transmitter to be programmed, including any existing transmitters.
10. Remove the ignition key from the ignition lock cylinder.
11. Reinstall the “BCMPRGRM” fuse into the fuse panel.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Montana