Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Grand Am

Step-by-Step Programming Instructions:

1. Ensure the ignition is turned off.
2. Locate the programming connector in the trunk (driver’s side). It’s a plastic connector with two wires leading to it. The connector isn’t connected to anything. You might need to pull back trim to access it.
3. The programming connector should have two terminals. Connect both terminals with a suitable jumper wire. Ensure the terminals remain connected throughout the programming procedure.
4. Press the LOCK and UNLOCK buttons on the remote simultaneously. In response, the Keyless Entry Module will cycle all the Door Lock Motors at once. Your new remote has been accepted, and all existing remotes have been erased.
5. Repeat the previous step for each additional remote (including any existing remotes). Do not remove the jumper wire between programming of remotes.
6. Remove the jumper wire from the Keyless Remote Connector.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Grand Am