Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2014 Mitsubishi Mirage Ignition Smart Chip Key Transponder

0
23

How to Program a 2014 Mitsubishi Mirage Ignition Smart Chip Key Transponder

Step by Step How to Programming Instructions:

For vehicles equipped with the Remote Head Key System, follow these instructions to add a new key. Before starting, ensure you already have two programmed keys, and note that a maximum of 8 keys can be programmed.

1. Insert the first valid key into the ignition switch and turn it to the “ON” position for 5 seconds.
2. Turn the key to the “OFF” position and remove it.
3. Within 30 seconds of removing the first key, insert the second valid key into the ignition and turn it to the “ON” position. Approximately 10 seconds later, the immobilizer display will start blinking.
4. When the immobilizer display starts blinking, turn the second valid key to the “OFF” position and remove it. Within 30 seconds after doing so, insert a blank immobilizer key into the ignition switch and turn it to the “ON” position. Ensure this operation is completed within 30 seconds after the immobilizer display starts blinking. When programming is complete, the immobilizer display will come on for 30 seconds and then turn off. If an error occurs, the blinking immobilizer display will turn off during the procedure.
5. If you wish to register another key, repeat the process from step 1.

For vehicles with the Fast Key Smart Key System, follow these instructions. Note that this vehicle is not onboard programmable and requires a qualified professional to program smart key remote fobs.

1. Locate an automotive locksmith in your area using the phone number provided.
2. If your vehicle is still mobile, consider driving to the locksmith instead of having them come to you, as it may save you money.
3. The locksmith will then connect specialized computer equipment to your vehicle to program the smart key remote fob.

In the event that all keys are lost with either the Key System or the F.A.S.T. Key System, follow these steps. Note that this vehicle is not onboard programmable and requires a qualified professional to program smart key remote fobs.

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, consider driving to the locksmith instead of having them come to you, as it may save you money.
3. The locksmith will then connect specialized computer equipment to your vehicle in order to program the smart key remote fob.

Leave a reply

X
X