Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2024 Ford Edge

Step-by-Step Programming Instructions:

Note: Prior to proceeding, ensure you have two previously programmed remote controls inside your vehicle and the new unprogrammed remote controls readily available. Your vehicle must be turned off, and all doors must remain closed throughout the procedure. Execute all steps within 30 seconds and wait for at least one minute if any steps are performed out of sequence. Here’s the process:

1. Open the center console lid and locate the backup slot inside. Insert the first programmed remote into the backup slot. Without pressing the brake pedal, press and release the push-button ignition switch.
2. After a brief pause, press and release the push-button ignition switch again. Remove the remote control.
3. Within 10 seconds, insert the second programmed remote control into the backup slot. Press and release the push-button ignition switch.
4. After a moment, press and release the push-button ignition switch again. Keep the ignition on for several seconds, but no more than 10 seconds. Remove the remote control.
5. Insert the unprogrammed remote control into the backup slot and press and release the push-button ignition switch. Programming is now complete.
6. With your foot on the brake pedal, press the push-button ignition switch to confirm that the remote control functions operate and your vehicle starts with the new remote control.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2024 Ford Edge