404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2023 Ford F150 Lightning Ignition Smart Key Fob - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2023 Ford F150 Lightning Ignition Smart Key Fob

0
23

Compare
SKU: Remote Ford F150 Lightning 2023 Categories: , , , Tags: , , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2023 Ford F150 Lightning

Step-by-Step Programming Instructions:

1. Ensure you have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed keys readily accessible. Make sure your vehicle is off before starting. Close all doors and keep them closed throughout the procedure. Perform all steps within 30 seconds of starting the sequence. If any steps are performed out of sequence, stop and wait for at least one minute before starting again. Read and understand the entire procedure before beginning.

2. Place the first programmed key in the backup slot in the center console, then press the push-button ignition switch. Insert the first previously programmed coded key into the ignition.

3. Wait five seconds and then press the push-button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds but no more than 10 seconds.

4. Remove the intelligent access key. Switch the ignition off and remove the first coded key from the ignition.

5. Within 10 seconds, place a second programmed intelligent access key in the backup slot. Press the push-button ignition switch. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.

6. Wait five seconds and then press the push-button ignition switch again. Switch the ignition from off to on. Keep the ignition on for at least three seconds but no more than 10 seconds.

7. Remove the intelligent access key. Switch the ignition off and remove the second previously programmed coded key from the ignition.

8. Place the unprogrammed intelligent access key in the backup slot and press the push-button ignition switch. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.

9. Programming is now complete. Verify that the remote control functions operate and your vehicle starts with the new intelligent access key. If programming was not successful, wait 10 seconds and repeat Steps 1 through 7.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2023 Ford F150 Lightning

Leave a reply

X
X