404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2021 Chevrolet Suburban Ignition Smart Chip Key Transponder - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2021 Chevrolet Suburban Ignition Smart Chip Key Transponder

0
22

Compare
SKU: Chevrolet Suburban 2021 Categories: , , , Tags: , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2021 Chevrolet Suburban

Step-by-Step Programming Instructions:

Programming with Recognized Remote Keys:
To add a new key to the vehicle’s system when there are two recognized keys, follow these steps. Make sure the vehicle is in the run position and all remote keys are present:

For Suburbans with front bench seats:
1. Position the two recognized remote keys on the passenger seat.
2. Access the DIC menu and select “Remote Key Learn.” The DIC will display READY FOR REMOTE #3, 4, 5, etc.
3. Insert the new remote key into the backup pocket located in the lower console bin.
4. Press the ENGINE START/STOP button. Once the remote key is learned, the DIC will indicate readiness to program the next remote key.
5. Remove the remote key from the backup location and press either UNLOCK or LOCK. Repeat Steps 3–5 for additional remote keys. After programming all keys, hold down the ENGINE START/STOP button for about 12 seconds to exit programming mode.

For Suburbans without front bench seats:
1. Place the two recognized remote keys on the passenger seat.
2. Navigate to the DIC menu and select “Remote Key Learn.” The DIC will display READY FOR REMOTE #3, 4, 5, etc.
3. Insert the new remote key into the backup pocket located in the left cupholder.
4. Press the ENGINE START/STOP button. Once the remote key is learned, the DIC will indicate readiness to program the next remote key.
5. Remove the remote key from the backup location and press either UNLOCK or LOCK. Repeat Steps 3–5 for additional remote keys. After programming all keys, hold down the ENGINE START/STOP button for about 12 seconds to exit programming mode.

Programming without Recognized Remote Keys:
If you lack two recognized remote keys, follow these steps:
1. Use LocateALocksmith.com to find an automotive locksmith in your area.
2. Consider driving to the locksmith if your vehicle is still operational, as this may be more cost-effective.
3. The locksmith will connect specialized computer equipment to your vehicle to program the smart key remote fob.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2021 Chevrolet Suburban

Leave a reply

X
X