Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2020 Cadillac XT5

Step-by-Step Programming Instructions:

Programming with a Recognized Transmitter:
When you have two recognized transmitters, you can add a new transmitter to your vehicle. Follow these steps:

1. Place the two recognized transmitters in the cupholder.
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of one transmitter into the key lock cylinder on the driver door and turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4, etc.
3. Place the new transmitter into the transmitter pocket inside the center console storage area between the driver and front passenger seats. You’ll need to open the storage area and lift the storage tray to access the transmitter pocket.
4. Press ENGINE START/STOP. When the transmitter is learned, the DIC display will indicate that it is ready to program the next transmitter.
5. Remove the transmitter from the transmitter pocket and press the unlock or lock button. To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode. Return the key back into the transmitter.

Programming without a Recognized Transmitter:
If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters:

1. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of one transmitter into the key lock cylinder on the driver door handle and turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN, then press ENGINE START/STOP. The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE #1.
4. Place the new transmitter into the transmitter pocket inside the center console storage area between the driver and front passenger seats. You’ll need to open the storage area and lift the storage tray to access the transmitter pocket.
5. Press ENGINE START/STOP. When the transmitter is learned, the DIC display will indicate that it is ready to program the next transmitter.
6. Remove the transmitter from the transmitter pocket and press the unlock or lock button. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode. Return the key back into the transmitter.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2020 Cadillac XT5