How to Program a 2019 Lincoln MKC Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Lincoln MKC

Step-by-Step Programming Instructions:

1. Ensure you have a maximum of four keys available for programming.
2. You need two previously programmed intelligent access keys inside your vehicle and the new unprogrammed key.
3. If you have only one or no working keys, contact a local locksmith.
4. Make sure the ignition is switched off before starting the procedure.
5. Close all doors and keep them closed throughout the procedure.
6. Complete all steps within 30 seconds of starting the sequence.
7. If you make any mistakes, stop and wait for at least one minute before starting again.
8. Familiarize yourself with the entire procedure before starting.
9. Open the center console lid.
10. Insert the first programmed key into the backup slot.
11. Press the push-button ignition switch.
12. Wait five seconds, then press the push-button ignition switch again.
13. Remove the intelligent access key.
14. Within 10 seconds, place the second programmed intelligent access key in the backup slot.
15. Press the push-button ignition switch.
16. Wait five seconds, then press the push-button ignition switch again.
17. Remove the intelligent access key.
18. Wait five seconds, then place the unprogrammed intelligent access key in the backup slot.
19. Press the push-button ignition switch.
20. Programming is now complete.
21. Verify that the remote control functions operate and your vehicle starts with the new intelligent access key.
22. If programming was unsuccessful, wait 10 seconds and repeat steps 1 through 7.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Lincoln MKC