Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Ford Mustang

Step-by-Step Programming Instructions:

Programming a Spare Intelligent Access Key:

Note: You can program a maximum of four intelligent access keys to your vehicle. Ensure you have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. Contact a local locksmith if two previously programmed keys are not available.

1. Make sure your vehicle is off before beginning this procedure. Ensure all doors are closed and remain closed throughout the procedure.
2. Remove the rubber covering from the cupholder.
3. Place the first programmed key in the backup slot at the bottom of the cupholder.
4. Press the push-button ignition switch.
5. Wait five seconds and then press the push-button ignition switch again.
6. Remove the intelligent access key.
7. Within 10 seconds, place a second programmed intelligent access key in the backup slot.
8. Press the push-button ignition switch.
9. Wait five seconds and then press the push-button ignition switch again.
10. Remove the intelligent access key.
11. Place the unprogrammed intelligent access key in the backup slot and press the push-button ignition switch.
12. Programming is now complete.
13. Verify that the remote control functions operate and your vehicle starts with the new intelligent access key.
14. If programming was not successful, wait 10 seconds and repeat Steps 1 through 7.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Ford Mustang