Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Buick Encore

Step-by-Step Programming Instructions:

Programming with Two Programmed Remotes:

When programming a new remote to a vehicle with two programmed remotes, follow these steps:

1. Place the two programmed remotes in the center console front cupholder.
2. Insert the key of the new remote into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “READY FOR REMOTE #2, 3, 4, or 5.”
3. Remove the two programmed remotes from the center console front cupholder.
4. Place the new transmitter in the front cupholder.
5. Press the ENGINE START/STOP button. When the remote is learned, the DIC will indicate that it is ready to program the next remote.
6. Remove the transmitter from the transmitter pocket and press unlock. To program additional transmitters, repeat Steps 4–6. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for 10 seconds to exit programming mode.

Programming without Two Programmed Remotes:

If two currently programmed remotes are not available, follow this procedure to program up to eight remotes. Note that this feature is not available in Canada. This procedure takes approximately 30 minutes to complete.

1. Insert the key of the remote into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “REMOTE LEARN PENDING, PLEASE WAIT.”
2. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press ENGINE START/STOP. The DIC will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Repeat Step 2 two additional times. After the third time, all previously known remotes will no longer work with the vehicle. The DIC should now show “READY FOR REMOTE #1.”
4. Place the new remote in the front cupholder.
5. Press the ENGINE START/STOP button. When the remote is learned, the DIC will indicate that it is ready to program the next remote.
6. Remove the remote from the cupholder and press unlock. To program additional remotes, repeat Steps 4–6. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for 10 seconds to exit programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2019 Buick Encore