Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Jeep Wrangler

Step-by-Step Programming Instructions:

the procedure for adding a new key to your remote head key system, provided you have two valid keys:

1. Begin by inserting the first valid key into the ignition switch. Turn it to the ON/RUN position for at least three seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.

2. Next, insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, you’ll hear a chime, and the Vehicle Security Light will begin flashing. Turn the ignition switch to the LOCK position and remove the second key.

3. Now, insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, you’ll hear a single chime, and the Vehicle Security Light will stop flashing. To confirm that programming is complete, the Vehicle Security Light will briefly turn on again before turning off. Your new key is now programmed, and the Remote Keyless Entry transmitter will also be programmed during this process. Repeat these steps to program up to eight keys.

For vehicles with a smart key system, note that it’s not possible to program the keys on board. You’ll need to engage a qualified professional locksmith to program the smart key remote fobs. You can find one in your area using LocateALocksmith.com. If your vehicle is still mobile, you might save money by driving to the locksmith instead of having them come to you. The locksmith will then use specialized computer equipment to program the smart key remote fob.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2018 Jeep Wrangler