Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Mitsubishi Lancer

Step-by-Step Programming Instructions:

To program the key portion of your remote head key, follow these steps:

1. Begin by obtaining a key cut by a Locksmith or equivalent professional.
2. Insert an existing first (working) key into the ignition cylinder.
3. Turn the ignition cylinder ON (without cranking the engine) for 5 seconds, then back to OFF, and remove the key.
4. Within 10 seconds, insert a second working key and turn it to ON. The security light will flash twice. Then switch the ignition back to OFF and remove the key.
5. Within 10 seconds, insert the new (unprogrammed) key and turn it to ON.
6. The security light will illuminate for 3 seconds, indicating that the new key has been successfully programmed.
7. Turn the ignition to OFF and remove the newly programmed key. Repeat steps 4 and 5 to program additional keys if necessary. All new keys must be programmed within 30 seconds of removing the second programmed key and observing the security light flashing twice.
8. To exit programming mode, leave the ignition switched ON for more than 30 seconds.

For programming the remote portion of your remote head key, use the following instructions:

1. Ensure you have all current and new remote control transmitters you wish to register.
2. With a valid (already registered) remote control transmitter, press the UNLOCK button (2) for 4 to 10 seconds. Then press and hold the LOCK button (1).
3. Within 10 seconds of pressing the LOCK button, release both the LOCK and UNLOCK buttons in sequence. This activates the registration mode, erasing ID codes for all remote control transmitters except the one used in steps 2 and 3.
4. Within 60 seconds after step 3, complete the ID code registration operation using the next remote control transmitter you wish to register within 4 seconds.
5. Follow the steps to register additional remote control transmitters as needed.
6. If no ID code of a remote control transmitter is registered within 60 seconds after step 4, the registration mode is canceled, and the normal mode returns.

For programming new F.A.S.T. keys to the system, follow these steps:

1. Remove the emergency key from the F.A.S.T. key.
2. While pushing the lock release buttons, remove the cover of the ignition switch.
3. Insert the emergency key into the ignition switch.
4. Insert the already programmed F.A.S.T. key into the emergency key.
5. Turn the emergency key with the F.A.S.T. key to the “ON” position within 30 seconds.
6. Remove the F.A.S.T. key from the emergency key.
7. With the first valid F.A.S.T. key, press the UNLOCK button for 4 to 10 seconds and press the LOCK button during this time.
8. Release the LOCK and UNLOCK buttons within 10 seconds of pressing the LOCK button in step 7.
9. With the second valid F.A.S.T. key, repeat the same procedure as step 7.
10. Release the LOCK and UNLOCK buttons within 10 seconds of pressing the LOCK button in step 9. The immobilizer display will blink on the information screen.
11. Press the LOCK button twice with the blank F.A.S.T. key, and the immobilizer display will come on for 30 seconds on the information screen.
12. This completes the registration of the F.A.S.T. key.

Note: The indicator light (5) will illuminate each time a button is pressed. The keyless entry system does not function if the key is left in the ignition switch.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Mitsubishi Lancer