Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Lincoln MKX

Step-by-Step Programming Instructions:

Note: You can program up to four intelligent access keys to your vehicle. Ensure you have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. If two previously programmed keys are not available, contact a locksmith for programming assistance. Before starting, ensure the ignition is switched off and all doors are closed.

1. Open the floor console storage compartment lid.
2. Insert the intelligent access key into the backup slot with the buttons facing the rear of your vehicle and the keyring up.
3. Press the push-button ignition switch.
4. Wait five seconds, then press the push-button ignition switch again.
5. Remove the intelligent access key.
6. Within ten seconds, insert a second programmed intelligent access key into the backup slot and press the push-button ignition switch.
7. Wait five seconds, then press the push-button ignition switch again.
8. Remove the intelligent access key.
9. Wait five seconds, then insert the unprogrammed intelligent access key into the backup slot and press the push-button ignition switch. If programming was unsuccessful, wait ten seconds and repeat Steps 1 through 7.

Ensure you follow all steps within 30 seconds of starting the sequence and wait at least one minute before restarting if any steps are carried out of sequence. It’s essential to read and understand the entire procedure before beginning.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Lincoln MKX