Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Lincoln Continental

Step-by-Step Programming Instructions:

To initiate this procedure, ensure you have two previously programmed intelligent access keys inside your vehicle, with the new unprogrammed intelligent access key readily accessible. Before commencing, ensure the ignition is switched off and that all doors are closed and remain closed throughout the process. Complete all steps within 30 seconds of initiating the sequence, and pause for at least one minute if any steps are performed out of sequence. Familiarize yourself with the entire procedure before starting. Here are the steps:

1. Remove the key blade from the transmitter.
2. Open the floor console storage compartment lid.
3. Insert the first programmed key into the backup slot.
4. Press the push-button ignition switch.
5. After five seconds, press the push-button ignition switch again.
6. Remove the intelligent access key.
7. Within 10 seconds, insert a second programmed intelligent access key into the backup slot and press the push-button ignition switch.
8. After five seconds, press the push-button ignition switch again.
9. Remove the intelligent access key.
10. Wait for five seconds, then place the unprogrammed intelligent access key into the backup slot and press the push-button ignition switch.

Programming is now complete. Verify that the remote control functions operate and that your vehicle starts with the new intelligent access key. If programming was unsuccessful, wait for 10 seconds and repeat steps 1 through 7.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Lincoln Continental