404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2017 Ford Edge Ignition Smart Chip Key Transponder - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2017 Ford Edge Ignition Smart Chip Key Transponder

0
19

Compare
SKU: Ford Edge 2017 Categories: , , , Tags: , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Ford Edge

Step-by-Step Programming Instructions:

You must have two previously programmed smart keys inside the vehicle, with the new unprogrammed smart key readily accessible. Note that a maximum of four smart keys can be programmed to your vehicle. If you wish to replace a previously programmed smart key with a new one, or if you already have four smart keys programmed, you’ll need to contact a Locksmith to have them erased and reprogrammed.

Before initiating this procedure, ensure that the vehicle is switched off and that all doors are closed and remain closed throughout. Follow the steps precisely as outlined below, ensuring that each action is completed within 30 seconds of starting the sequence. If any steps are performed out of sequence, pause and wait for at least one minute before resuming. Please read and understand the entire procedure before beginning.

1. Open the floor console storage compartment lid. With the buttons facing the rear of your vehicle and the key ring up, insert the intelligent access key into the backup slot.
2. Repeat this step with the smart key, ensuring it is inserted with the buttons facing the rear of the vehicle and the key ring up.
3. Press the push button ignition switch.
4. After a five-second delay, press the push button ignition switch again.
5. Remove the smart key.
6. Within 10 seconds, insert a second programmed smart key into the backup slot and press the push button ignition switch.
7. After a five-second delay, press the push button ignition switch again.
8. Remove the smart key.
9. Wait for five seconds, then insert the unprogrammed smart key into the backup slot and press the push button ignition switch.

Once these steps are completed, the programming is finished. Verify that the remote control functions operate and that your vehicle starts with the new smart key. If programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 7. If you have one working Smart Key of this style, consider purchasing a Programmer.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Ford Edge

Leave a reply

X
X