Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Chevrolet Impala

Step-by-Step Programming Instructions:

Programming with Two Recognized Keys (Key Vehicles Only):

This process is for adding a new transmitter, not replacing an existing one. Follow these steps:
1. Insert the original, already programmed key into the ignition and turn it to the ON/RUN position.
2. Turn the key to LOCK/OFF and remove it from the ignition.
3. Quickly, within five seconds, insert the second original, already programmed key into the ignition and turn it to the ON/RUN position.
4. Turn the key to LOCK/OFF and remove it from the ignition.
5. Insert the new key to be programmed and turn it to the ON/RUN position within five seconds. The security light will turn off once the key has been programmed.
6. Repeat Steps 1–5 if additional keys need to be programmed.

Programming without Two Recognized Keys (Key Vehicles Only):

If you don’t have two recognized keys available, follow this procedure to program the first key. Note that Canadian regulations require owners to consult their dealer for this process. It will take approximately 30 minutes to complete for the first key. Ensure the vehicle is off and all keys you wish to program are available.
1. Insert the new vehicle key into the ignition.
2. Turn it to ON/RUN. The security light will come on.
3. Wait for 10 minutes until the security light turns off.
4. Turn the ignition to LOCK/OFF.
5. Repeat Steps 2–4 two more times. After the third time, turn the ignition to ON/RUN; the key is learned, and all previously known keys will no longer work with the vehicle.
6. To program a second key, turn the ignition to LOCK/OFF, insert the second key to be learned, and rotate it to ON/RUN. After two keys are learned, any remaining keys can be programmed by following the procedure in “Programming with Two Recognized Keys (Key Vehicles Only).”

Programming with Recognized Transmitters (Keyless Access Vehicles Only):

A new transmitter can be programmed to the vehicle when there are two recognized transmitters. Follow these steps:
1. Place the two recognized keys in the front cup holder.
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the new transmitter into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4, or 5, etc.
3. Remove the recognized key and place the new transmitter into the front cup holder.
4. Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
5. Remove the transmitter from the front cup holder and press UNLOCK or LOCK on the transmitter. To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
6. Return the vehicle key back into the transmitter.

Programming without Recognized Transmitters (Keyless Access Vehicles Only):

If two currently recognized transmitters are not available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. It will take approximately 30 minutes to complete. Ensure the vehicle is off and all of the transmitters you wish to program are with you.
1. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the outside of the driver door and turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP. The DIC displays will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1.
4. Place the transmitter in the front cup holder.
5. Press ENGINE START/STOP. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter.
6. Remove the transmitter from the front cup holder and press UNLOCK or LOCK on the transmitter. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
7. Return the vehicle key back into the transmitter.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Chevrolet Impala