Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2016 Ford Focus

Step-by-Step Programming Instructions:

If you have a Key or Remotehead Key system, here’s how to add a new key:

1. Insert the first previously programmed key into the ignition.
2. Switch the ignition from off to on, keeping it on for at least three seconds but no more than 10 seconds.
3. Turn the ignition off and remove the first programmed key.
4. Within 10 seconds, insert the second previously programmed key into the ignition.
5. Again, switch the ignition from off to on for at least three seconds but no more than 10 seconds.
6. Turn the ignition off and remove the second programmed key.
7. Within 10 seconds of turning off the ignition and removing the previously programmed key, insert the new unprogrammed key into the ignition.
8. Switch the ignition from off to on and keep it on for at least six seconds.
9. Remove the newly programmed key from the ignition. If successful, it will start the engine and operate the remote entry system if applicable. If unsuccessful, wait 10 seconds and repeat Steps 1 through 8.

For a Ford Focus with the smart key system:

You must have two previously programmed keys to program a spare key. If you have one working smart key, you can rent a programmer, or locate a locksmith in your area. Ensure the ignition is switched off before starting, and all doors are closed and remain closed throughout the procedure. Perform all steps within 30 seconds of starting the sequence. Stop for at least one minute if any steps are performed out of sequence.

1. Open the floor console storage compartment lid.
2. Remove the tray.
3. Place the first programmed smart key flat on the symbol at the bottom of the floor console storage compartment.
4. Press the push button ignition switch.
5. Wait five seconds, then press the push button ignition switch again.
6. Remove the intelligent access key.
7. Within 10 seconds, place a second programmed smart key flat on the symbol.
8. Press the push button ignition switch.
9. Wait five seconds, then press the push button ignition switch again.
10. Remove the smart key.
11. Within 10 seconds, place the unprogrammed smart key flat on the symbol.
12. Press the push button ignition switch. Programming is complete.

Verify that the remote control functions operate and your vehicle starts with the new smart key. If programming was unsuccessful, wait 10 seconds and repeat Steps 1 through 12.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2016 Ford Focus