Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2016 Chevrolet Malibu

Step-by-Step Programming Instructions:

The vehicle’s transmitters can be reprogrammed to deactivate lost or stolen ones. Each vehicle can have up to eight matched transmitters. Here’s how to program with and without a recognized transmitter:

Programming with a Recognized Transmitter (Key Vehicles Only):
To program a new key:
1. Insert the original, already programmed key into the ignition and turn it to the ON/RUN position.
2. Turn the key to LOCK/OFF, and remove it.
3. Insert the new key to be programmed and turn it to the ON/RUN position within five seconds. The security light will turn off once the key has been programmed.
4. Repeat Steps 1–3 if additional keys need programming.

Programming without a Recognized Transmitter (Key Vehicles Only):
U.S. owners can program a new key if a recognized key is not available. Canadian regulations require consulting a dealer. If no recognized keys are available, follow these steps:
1. Insert the new vehicle key into the ignition.
2. Turn to ON/RUN. The security light will illuminate.
3. Wait 10 minutes until the security light turns off.
4. Turn the ignition to LOCK/OFF.
5. Repeat Steps 2–4 two more times. After the third time, turn to ON/RUN; the key is learned, and previously known keys won’t work. Remaining keys can be learned using the procedure in “Programming with a Recognized Transmitter (Key Vehicles Only).”

Programming with a Recognized Transmitter (Keyless Access Vehicles Only):
A new transmitter can be programmed if there is one recognized transmitter. Follow these steps:
1. Place the recognized transmitter(s) in the transmitter pocket inside the center console.
2. Insert the vehicle key of the new transmitter into the key lock cylinder on the outside of the driver door and turn it to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays READY FOR REMOTE #2, 3, 4, or 5.
3. Place the new transmitter into the transmitter pocket, inside the center console storage area.
4. Press the START button. When the transmitter is learned, the DIC will indicate readiness to program the next transmitter.
5. Remove the transmitter from the pocket and press UNLOCK. To program additional transmitters, repeat Steps 3–5.

Programming without a Recognized Transmitter (Keyless Access Vehicles Only):
If no recognized transmitters are available, follow these steps:
1. Insert the vehicle key of the transmitter into the key lock cylinder on the outside of the driver door and turn it to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN, then press the START button.
3. Repeat Step 2 two additional times. After the third time, previously known transmitters won’t work. Remaining transmitters can be learned using the next steps outlined.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2016 Chevrolet Malibu