Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 Ford Transit

Step-by-Step Programming Instructions:

1. Ensure you have two previously programmed keys and the new unprogrammed key accessible. If you lack two previously programmed keys, a locksmith is required to cut and program a second key.
2. Insert the first previously programmed key into the ignition.
3. Turn the ignition from off to on. Maintain the ignition on for at least three seconds, but no more than ten seconds.
4. Turn the ignition off and remove the first programmed key from the ignition.
5. After three seconds but within ten seconds of turning the ignition off, insert the second previously programmed key into the ignition.
6. Turn the ignition from off to on. Keep the ignition on for at least three seconds, but no more than ten seconds.
7. Turn the ignition off and remove the second previously programmed key from the ignition.
8. After three seconds but within ten seconds of turning the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.
9. Turn the ignition from off to on. Keep the ignition on for at least six seconds.
10. Remove the newly programmed key from the ignition. If the key has been successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated key head transmitter). If not successfully programmed, wait ten seconds and repeat Steps 1 through 8.

For programming a separate key and remote, follow these steps:

1. Open the driver’s door.
2. Enter the vehicle and fasten the seatbelt.
3. Close the driver’s door.
4. Turn the ignition ON (Do not start, just to the on position) and OFF four times.
5. The door locks will cycle one time.
6. Press any button on the remote two times.
7. The locks will cycle.
8. Remove the key, release the seatbelt, and exit the vehicle.
9. Test the remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 Ford Transit