Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 Cadillac Escalade

Step-by-Step Programming Instructions:

1. Start with the vehicle off and ensure you have at least one recognized transmitter along with any new ones you wish to program. Remove the key from the recognized transmitter.
2. Place the recognized transmitter(s) in the cupholder or passenger seat.
3. Remove the key lock cylinder cap. Insert the vehicle key into the key lock cylinder on the driver door handle, turning it counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “READY FOR REMOTE #2, 3, 4, or 5.”
4. Put the new transmitter into the transmitter pocket located inside the center console storage area.
5. Press the ENGINE START/STOP button. Once the transmitter is learned, the DIC will indicate readiness to program the next transmitter.
6. Remove the transmitter from the transmitter pocket and press UNLOCK. To program additional transmitters, repeat steps 3–5. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode.

Programming without a Recognized Transmitter:

1. If there are no recognized transmitters available, follow this procedure to program up to eight transmitters. Note: This feature is not available in Canada. The vehicle must be off and all transmitters you wish to program must be with you.
2. Remove the vehicle key from the transmitter and remove the key lock cylinder cap. Then, insert the vehicle key into the key lock cylinder on the driver door handle, turning it counterclockwise to the unlock position five times within 10 seconds. The DIC will display “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press the ENGINE START/STOP button. The DIC will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
4. Repeat step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. The DIC display should now show “READY FOR REMOTE #1.”
5. Place the new transmitter into the transmitter pocket inside the center console storage area.
6. Press the ENGINE START/STOP button. Once the transmitter is learned, the DIC will indicate readiness to program the next transmitter.
7. Remove the transmitter from the transmitter pocket and press UNLOCK. To program additional transmitters, repeat steps 4–6. When all additional transmitters are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode.
8. Return the key back into the transmitter.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2015 Cadillac Escalade