Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2014 Ford Expedition

Step-by-Step Programming Instructions:

1. You need two programmed keys and the new unprogrammed key accessible. If you lack two programmed keys, a locksmith is needed to cut and program a second key.
2. Insert the first programmed key into the ignition.
3. Switch the ignition from off to on. Keep it on for at least three seconds, but no more than ten seconds.
4. Switch the ignition off and remove the first programmed key.
5. After three seconds but within ten seconds of switching the ignition off, insert the second programmed key into the ignition.
6. Switch the ignition from off to on. Keep it on for at least three seconds, but no more than ten seconds.
7. Switch the ignition off and remove the second programmed key.
8. After three seconds but within ten seconds of switching the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.
9. Switch the ignition from off to on. Keep it on for at least six seconds.
10. Remove the newly programmed key from the ignition. If successful, it will start the engine and operate the remote entry system (if it’s an integrated keyhead transmitter). If unsuccessful, wait ten seconds and repeat Steps 1 through 8.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2014 Ford Expedition