Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2014 Cadillac CTS

Step-by-Step Programming Instructions:

1. Start with the vehicle off and ensure all transmitters, both old and new, are with you.
2. Remove the vehicle key from the recognized transmitter.
3. Place the recognized transmitter(s) in the cup holder.
4. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key into the key lock cylinder on the driver door handle and turn it counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “READY FOR REMOTE #2, 3, 4, etc.”
5. Place the new transmitter into the transmitter pocket. Access the transmitter pocket by opening the center console storage area and removing the rubber mat.
6. Press the ENGINE START/STOP button. Once the transmitter is learned, the DIC display will indicate readiness to program the next transmitter.
7. Remove the transmitter from the pocket and press the unlock or lock button on it. Repeat steps 4-6 for additional transmitters. Once all additional transmitters are programmed, hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
8. Return the vehicle key to the transmitter.

Programming without a Recognized Transmitter:

1. Ensure all transmitters to be programmed are with you and the vehicle is off.
2. Remove the vehicle key from the transmitter.
3. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key into the key lock cylinder on the driver door handle and turn it counterclockwise to the unlock position five times within 10 seconds. The DIC will display “REMOTE LEARN PENDING, PLEASE WAIT.”
4. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN” and then press the ENGINE START/STOP button. The DIC display will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
5. Repeat step 4 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. The DIC display should now show “READY FOR REMOTE #1.”
6. Place the new transmitter into the transmitter pocket. Access the transmitter pocket by opening the center console storage area and removing the rubber mat.
7. Press the ENGINE START/STOP button. Once the transmitter is learned, the DIC display will indicate readiness to program the next transmitter.
8. Remove the transmitter from the pocket and press the unlock or lock button on it. Repeat steps 5-7 for additional transmitters. Once all additional transmitters are programmed, hold the ENGINE START/STOP button for approximately 12 seconds to exit programming mode.
9. Return the vehicle key to the transmitter.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2014 Cadillac CTS