Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2013 Mazda 5

Step-by-Step Programming Instructions:

Follow these steps to program the essential part of your flip key. You must possess two original keys that can start your engine for this procedure. If you have only one working key or none at all, this must be done by a locksmith. Also, your new third (unprogrammed) key must be cut before starting this procedure. This process requires the use of original programmed keys.

1. Insert a programmed (working) key into the ignition cylinder.
2. Turn the ignition cylinder ON (without starting the engine) and then back to OFF. Keep the ignition ON for approximately 3 seconds until the security light turns off.
3. Turn to the OFF position and remove the existing key.
4. Within 10 seconds, insert a second programmed (working) key and turn it to ON, then back to OFF. Keep the ignition ON for at least 3 seconds until the security light goes out.
5. Turn to the OFF position and remove the existing key.
6. Insert the new (unprogrammed) key within 20 seconds and turn it to ON. Leave it in the ON position for at least 3 seconds, then turn it back to OFF.
7. The security light will illuminate for three seconds to indicate that the new key has been successfully programmed.

If you do not have two programmed keys, use LocateALocksmith.com to find a locksmith in your area.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2013 Mazda 5