Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2013 Ford Flex

Step-by-Step Programming Instructions:

If your Ford Flex has the smart key system, follow these steps to add a new key:

Note: You can program a maximum of four smart keys to your vehicle. You’ll need two previously programmed smart keys inside the vehicle and the new unprogrammed smart keys readily accessible. Ensure the vehicle is off before starting, and all doors are closed and remain closed throughout the procedure. Perform all steps within 30 seconds of starting the sequence. Stop for at least one minute if any steps are performed out of sequence. Read and understand the entire procedure before starting.

1. Place the new unprogrammed smart key in the pocket inside the center console with the buttons facing out and the key ring up.
2. Press the driver or passenger power door unlock control three times.
3. Press and release the brake pedal once.
4. Press the driver or passenger power door lock control three times.
5. Press and release the brake pedal once. The indicator on the START/STOP button should rapidly flash, indicating the programming mode has been entered, and two programmed smart keys have been detected in the vehicle.
6. Press the START/STOP button within one minute. A message will appear in the information display indicating the new smart key was programmed.
7. Remove the intelligent access key from the center console pocket and press the unlock button on the newly programmed smart key to exit programming mode.
8. Verify that the remote entry functions operate (press lock then unlock, making sure to end in unlock) and that the vehicle starts with the new smart key.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2013 Ford Flex