Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Mitsubishi Outlander Sport

Step-by-Step Programming Instructions:

For vehicles with regular keys or remote head keys (excluding cars sold in Canada), follow these steps to add a key to the system:

1. Ensure you have two already programmed working keys. If you lack two programmed keys, a locksmith must program a second key for you. Visit LocateALocksmith.com to find one in your area.

2. Insert the first programmed key into the ignition and turn it to the ON position for 5 seconds.

3. Turn the key to the LOCK position and remove it.

4. Within 30 seconds of turning the first key to the LOCK position, insert the second programmed key into the ignition and turn it to the ON position. About 10 seconds later, the immobilizer light will begin blinking.

5. When the immobilizer light starts blinking, turn the second key to the LOCK position and remove it. Within 30 seconds of removing the second key, insert the new unprogrammed key into the ignition and turn it to the ON position. Do this no more than 30 seconds after the immobilizer light starts blinking. When programming is complete, the immobilizer light will come on for 3 seconds and then turn off. If an error occurs, the immobilizer light will go off during the procedure.

6. To program another key, repeat steps 1 through 4.

If you have a remote head key and have only programmed the key portion, use the following procedure to program the remote portion:

1. Have all current and new remotes you want to program.

2. Using a programmed remote, press the UNLOCK button for 4 to 10 seconds, then press and hold the LOCK button.

3. Within 10 seconds of pressing the LOCK button, release the LOCK and UNLOCK buttons in sequence. At this time, all remotes except the one used in steps 2 and 3 will be erased, and the doors will lock and unlock to indicate programming mode.

4. Within 60 seconds after step 3, program the remaining remotes by:
a. Pressing both LOCK and UNLOCK buttons simultaneously for 2 seconds.
b. Releasing both the LOCK and UNLOCK buttons for 1 second.
c. Pressing the UNLOCK button and releasing it. If programming is successful, the door locks will lock and unlock. Repeat step 4 within 60 seconds for each additional remote you wish to program.

5. If no additional remotes are programmed within 60 seconds after step 4, the vehicle will exit programming mode.

6. Test all remotes.

For vehicles with a Smart Key system (excluding cars sold in Canada), use the following instructions to add a key to the system:

1. Open the driver’s door and keep it open until Smart Key programming is finished. Do not open or close other doors.

2. While carrying the first programmed Smart Key, turn the ignition to ON without starting the engine (perform this within 30 seconds).

3. Insert the new unprogrammed Smart Key into the key slot as illustrated.

4. With the first programmed Smart Key, press the UNLOCK button for 4 to 10 seconds and hold the LOCK button during this time.

5. Release the LOCK and UNLOCK buttons in sequence within 10 seconds of pressing the LOCK button in step 4 (perform this within 30 seconds).

6. With the second programmed Smart Key, press the UNLOCK button for 4 to 10 seconds and hold the LOCK button during this time.

7. Release the LOCK and UNLOCK buttons in sequence within 10 seconds of pressing the LOCK button in step 6. The immobilizer on the information screen in the multi-information display will blink. When programming is complete, the buzzer will sound 3 times, and the immobilizer display will come on for 30 seconds. If an error occurs, Smart Key programming will be terminated, and the buzzer will sound for 3 seconds.

8. If you wish to program another Smart Key, repeat the process from step 1 after turning the ignition OFF and removing the new Smart Key from the key slot.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Mitsubishi Outlander Sport