Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Mitsubishi Endeavor

Step-by-Step Programming Instructions:

Key Programming:
1. Begin by having a locksmith cut the key.
2. Insert an existing working key into the ignition cylinder.
3. Turn the ignition cylinder ON (without starting the engine) for 5 seconds, then back to OFF, and remove the key.
4. Within 10 seconds, insert a second working key and turn to ON. The security light will flash twice. Switch the ignition back to OFF and remove the key.
5. Within 10 seconds, insert the new (unprogrammed) key and turn to ON.
6. The security light will illuminate for 3 seconds, indicating the new key has been successfully programmed.
7. Turn the ignition to OFF and test the newly programmed key. Repeat steps 4 and 5 to program additional keys if necessary. All new keys must be programmed within 30 seconds of removing the second programmed key and observing the security light flashing twice.
8. To exit programming mode, leave the ignition switched ON for more than 30 seconds.

Remote Programming:
1. Locate the Data Port under the driver’s side dashboard, usually to the right of the steering column.
2. Insert keys into the ignition and leave in the OFF position.
3. Ensure there are metal contact pins in terminals 1 and 4, then connect the Data Port terminals 1 and 4 with a suitable jumper wire, keeping the wire connected throughout the programming procedure. Make sure to identify terminals 1 and 4.
4. Within 10 seconds of connecting the jumper wire, press the Hazard Switch 6 times. Note: The doors will automatically lock and unlock once, indicating the system is in programming mode.
5. Press the LOCK button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
6. Repeat step 5 with up to 4 remotes (including any existing remotes) within one minute. After completing each programming, the doors will lock and unlock once.
7. Disconnect the programming wire and remove the keys from the ignition.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Mitsubishi Endeavor