Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Mazda 2

Step-by-Step Programming Instructions:

1. Begin by entering the vehicle and closing all doors. Then, open the driver’s door and leave it open.

2. Within 24 seconds, insert the key into the ignition and turn the ignition switch to ON and then OFF three times. Leave the key in the ignition. Afterward, close and open the driver’s door three times.

3. If done correctly, the doors will automatically lock and then unlock, indicating that the vehicle is in programming mode. If the locks do not cycle, restart the procedure.

4. Press the unlock button twice on the first remote to be programmed. The door locks will cycle automatically to indicate successful programming. If there is only one remote to be programmed, press any button twice again on the same remote. Wait for locks to cycle, then push any button twice one more time on the same remote. If there are two remotes to be programmed, press any button on the second remote twice. Wait for locks to cycle, then push any button twice again on the second remote. To program three remotes, press any button twice on the second remote. Wait for locks to cycle, then press any button twice on the third remote.

5. Once programming is complete, close the door and test the remotes to ensure proper programming.

Instructions for programming the key portion of your flip key:

1. You must have 2 original keys that start your engine for this procedure. If you only have one working key or none at all, it must be programmed by a locksmith. Additionally, your new third (unprogrammed) key must also be cut prior to performing this procedure. This procedure requires original programmed keys.

2. Insert a programmed (working) key into the ignition cylinder.

3. Turn the ignition cylinder ON (without cranking the engine) and back to OFF. The ignition should stay in the ON position for approximately 3 seconds until security goes out.

4. Turn to OFF position and remove the existing key.

5. Within 10 seconds, insert a second programmed (working) key and turn to ON and then back to OFF. The ignition must be on for at least 3 seconds until the security light goes out.

6. Turn to OFF position and remove the existing key.

7. Insert the new (unprogrammed) key before twenty seconds have elapsed and turn to ON. Leave it in the ON position for at least 3 seconds and then turn back to OFF.

8. The security light will illuminate for three seconds to indicate that the new key has been successfully programmed.

If you do not have 2 original keys, they will have to be programmed by a locksmith. You can find a local locksmith at LocateALocksmith.com.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Mazda 2