404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2012 Lincoln MKS Ignition Smart Chip Key Transponder - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2012 Lincoln MKS Ignition Smart Chip Key Transponder

0
21

Compare
SKU: Lincoln MKS 2012 Categories: , , , Tags: , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Lincoln MKS

Step-by-Step Programming Instructions:

To program spare Intelligent Access Keys, follow these steps:

1. Ensure you have two previously programmed Intelligent Access Keys inside the vehicle and the new unprogrammed Intelligent Access Keys readily accessible. If two previously programmed keys are not available, you will need to have a locksmith program the spare key(s).

2. Make sure the vehicle is off before starting the procedure. Ensure that all doors are closed and remain closed throughout the procedure.

3. Perform the procedure exactly as described below, completing all steps within 30 seconds of starting the sequence. If any steps are performed out of sequence, stop and wait for at least one minute before starting again. Read and understand the entire procedure before you begin.

4. Place the new unprogrammed Intelligent Access Key in the pocket inside the glove box.

5. Press the driver or passenger power door unlock control three times.

6. Press and release the brake pedal one time.

7. Press the driver or passenger power door lock control three times.

8. Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indicating that programming mode has been entered and two programmed Intelligent Access Keys have been detected in the vehicle.

9. Within one minute, press the start/stop button. If four Intelligent Access Keys have already been programmed to your vehicle, the message “MAX # OF FOBS LEARNED” will be displayed on the message center.

10. Remove the Intelligent Access Key from the glove box pocket and press the unlock or lock control on the newly programmed Intelligent Access Keys to exit programming mode.

11. Verify that the remote entry functions operate (lock, unlock) and that the vehicle starts with the new Intelligent Access Key. If the Intelligent Access Key has been successfully programmed, it can be used to activate the Intelligent Access with Push Button Start feature and to start your vehicle.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Lincoln MKS

Leave a reply

X
X