Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Toyota FJ Cruiser

Step-by-Step Programming Instructions:

Note: If your key has a remote, this procedure will only program the remote portion. You will still need a locksmith to cut and program the key part of the remote key combo, or you can rent specialized equipment.

1. Begin with the key out of the ignition, the driver’s door open, all others closed, and the driver’s door unlocked.
2. Complete these steps within 5 seconds:
A. Insert the key into the ignition (Do NOT turn) and then pull the key out.
B. Insert the key into the ignition (Do NOT turn) and then pull the key out.
3. Complete these steps within 40 seconds:
A. Close and then open the driver’s door.
B. Close and then open the driver’s door.
C. Insert the key into the ignition (Do NOT turn) and then pull the key out.
4. Complete these steps within 40 seconds:
A. Close and then open the driver’s door.
B. Close and then open the driver’s door.
C. Insert the key into the ignition and leave it in the ignition.
D. Close the driver’s door.
E. Turn the ignition to ON (Do NOT start), then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock and then unlock automatically, indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Complete these steps within 40 seconds:
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after releasing the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once, indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6, as the remote was not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open the driver’s door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Toyota FJ Cruiser