Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Mercury Milan

Step-by-Step Programming Instructions:

You must have two previously programmed keys and the new unprogrammed key readily accessible. If you lack two previously programmed keys, you will need a Locksmith to cut and program a second key. If you have only one working key, you can Purchase a Programmer and Key Here. Follow these steps:

1. Insert the first previously programmed key into the ignition.
2. Turn the ignition from off to on. Keep the ignition on for at least three seconds but no more than 10 seconds.
3. Turn the ignition off and remove the first programmed key.
4. After three seconds but within 10 seconds of turning the ignition off, insert the second previously programmed key into the ignition.
5. Turn the ignition from off to on. Keep the ignition on for at least three seconds but no more than 10 seconds.
6. Turn the ignition off and remove the second previously programmed key.
7. After three seconds but within 10 seconds of turning the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.
8. Turn the ignition from off to on. Keep the ignition on for at least six seconds.
9. Remove the newly programmed key from the ignition. If the key has been successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter). If it was not programmed successfully, wait 10 seconds and repeat Steps 1 through 8.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Mercury Milan