Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Mazda 2

Step-by-Step Programming Instructions:

1. Begin by entering the vehicle and ensuring all doors are closed. Then, open the driver’s door and leave it open.
2. Within 24 seconds, insert the key into the ignition and turn the ignition switch to the ON position, then quickly switch it OFF three times. Leave the key in the ignition and proceed to close and open the driver’s door three times.
3. If done correctly, the doors will automatically lock and then unlock, indicating the vehicle is in programming mode. If the locks do not cycle, restart the procedure.
4. Press the unlock button twice on the first remote to be programmed. The door locks will cycle automatically to confirm successful programming. If programming only one remote, press any button twice on the same remote, wait for the locks to cycle, then press any button twice again on the same remote. For two remotes, press any button on the second remote twice, wait for the locks to cycle, then press any button twice again on the second remote. To program three remotes, press a button twice on the second remote, wait for locks to cycle, then press any button twice on the third remote.
5. Programming is now complete. Close the door and test the remotes to ensure proper programming.

To program the key portion of your flip key:
Ensure you have two original keys that start your engine. If you only have one working key or none at all, it must be programmed by a locksmith. Your new, third (unprogrammed) key must also be cut before performing this procedure. This procedure requires original programmed keys.
1. Insert a programmed (working) key into the ignition cylinder.
2. Turn the ignition cylinder ON (without cranking the engine) and back to OFF. The ignition should stay in the ON position for approximately 3 seconds until the security light goes out.
3. Turn to the OFF position and remove the existing key.
4. Within ten seconds, insert a second programmed (working) key and turn to ON and then back to OFF. The ignition must be on for at least 3 seconds until the security light goes out.
5. Turn to the OFF position and remove the existing key.
6. Insert the new (unprogrammed) key before twenty seconds have elapsed and turn to ON. Leave it in the ON position for at least 3 seconds and then turn back to OFF.
7. The security light will illuminate for three seconds to indicate the new key has been successfully programmed. If you do not have two programmed keys, they will need to be programmed by a locksmith.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Mazda 2