Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Lincoln MKZ

Step-by-Step Programming Instructions:

1. Begin with two previously programmed keys and the new unprogrammed key within reach. If you lack two previously programmed keys, a locksmith is needed to cut and program a second key. Alternatively, if you possess one working key, you can purchase a programmer and key.

2. Insert the first previously programmed key into the ignition.

3. Switch the ignition from off to on. Maintain the ignition on for at least three seconds but no more than ten seconds.

4. Turn the ignition off and remove the first programmed key from the ignition.

5. After three seconds but within ten seconds of switching the ignition off, insert the second previously programmed key into the ignition.

6. Switch the ignition from off to on. Keep the ignition on for at least three seconds but no more than ten seconds.

7. Turn the ignition off and remove the second previously programmed key from the ignition.

8. After three seconds but within ten seconds of switching the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.

9. Switch the ignition from off to on. Keep the ignition on for at least six seconds.

10. Remove the newly programmed key from the ignition. If the key has been successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated key head transmitter). If programming was not successful, wait ten seconds and repeat steps 1 through 8.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2011 Lincoln MKZ