404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2010 Toyota Corolla Ignition Smart Key Fob - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2010 Toyota Corolla Ignition Smart Key Fob

0
37

Compare
SKU: Remote Toyota Corolla 2010 Categories: , , , Tags: , , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Toyota Corolla

Step-by-Step Programming Instructions:

If your Corolla is equipped with a Smart Key System, follow these instructions. Please note that this vehicle cannot be programmed onboard and requires a qualified professional to program smart key remote fobs.

1. Find an automotive locksmith in your area by visiting LocateALocksmith.com.
2. If your vehicle is still mobile, consider driving to the locksmith to potentially save on costs.
3. The locksmith will use specialized computer equipment to program the smart key remote fob.

If your Corolla has a remote head key, you can follow these instructions to program the remote portion of the key. However, the key portion will need to be programmed by a locksmith or you can rent specialized equipment.

If ten seconds or more elapse between any of the following steps, you will need to start over again.

**Preparation:**
Ensure all doors except the driver’s door are closed and locked. The driver’s door should be open and unlocked.

**Programming Steps:**
1. Insert and remove the key from the ignition cylinder twice without turning it.
2. Open and close the driver’s door twice, ending with the door open.
3. Insert and remove the key from the ignition cylinder once without turning it.
4. Open and close the driver’s door twice, ending with the door open.
5. Insert the key into the ignition cylinder. (Do not remove or turn the key)
6. Close the driver’s door.
7. Turn the key in the ignition on and off twice and remove the key from the ignition. (If done correctly, all doors will lock and unlock twice to indicate that the system has entered the add mode)
8. Press both lock and unlock buttons on your remote simultaneously for one second.
9. Within three seconds, press the lock button on your remote for one second and release. (The vehicle will beep twice to indicate that it has accepted the new remote.)

To exit add mode, open and close the door and test remote operation.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Toyota Corolla

Leave a reply

X
X