How to Program a 2010 Scion xD Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Scion xD

Step-by-Step Programming Instructions:

If your key has a transponder system, you’ll need a locksmith to cut and program the key portion. If it’s a non-transponder system, only cutting the key is necessary, with no programming needed for the key portion.

1. Start with the key out of the ignition.
2. Open and unlock the driver’s side door. Close all other doors, including the trunk.
3. Within 5 seconds, insert the key into the ignition and pull it out twice.
4. Close then open the driver’s side door twice.
5. Insert the key into the ignition then remove it.
6. Close then open the driver’s side door twice.
7. Insert the key into the ignition and leave it there.
8. Close the driver’s side door.
9. Switch the ignition to ON then OFF.
10. Remove the key from the ignition.
11. The door locks will cycle to confirm the vehicle has entered programming mode successfully.
12. Push and hold the lock and unlock buttons for 1.5 seconds on the first remote being programmed. As soon as you let go, push the lock button and hold it for 2 seconds.
13. The door locks will cycle to confirm successful programming of the remote. If you have additional remotes, repeat step 12. If not, proceed to step 14.
14. Open the driver’s side door. Programming is now complete.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Scion xD