How to Program a 2010 Honda Accord Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Honda Accord

Step-by-Step Programming Instructions:

Note: These instructions solely pertain to programming the remote part of the key. If you possess one functioning key, you can purchase a programmer here to program a spare key. Entering the programming mode will deactivate all learned keyless remotes, rendering previously programmed remotes ineffective. You must reprogram all keyless remotes once you enter the programming mode. Each step must be completed within 5 seconds of the previous step to prevent exiting the programming mode.

1. Turn the ignition switch to ON (II).
2. Press the LOCK or UNLOCK button on any remote. (An unprogrammed remote can be utilized for this step.)
3. Turn the ignition switch to LOCK (0).
4. Repeat steps 1, 2, and 3 two more times using the same keyless remote as in step 2.
5. Turn the ignition switch to ON (II).
6. Press the LOCK or UNLOCK button on the same remote. Ensure the power door locks cycle to confirm entry into programming mode.
7. Press the LOCK or UNLOCK button on each remote you wish to program. Confirm acceptance of each remote by observing door lock cycles after pressing each remote button.
8. Turn the ignition switch to LOCK (0) to exit programming mode.
9. Test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Honda Accord