How to Program a 2009 GMC Yukon Denali Ignition Smart Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 GMC Yukon Denali

Step-by-Step Programming Instructions:

**For Vehicles with Driver Information Center Buttons:**

1. Insert the key and turn it to the ON position to access the Driver Information Center.
2. Press the vehicle information button until “PRESS TO RELEARN REMOTE KEY” displays.
3. Press the set/reset button until “REMOTE KEY LEARNING ACTIVE” displays.
4. Press and hold the lock and unlock buttons on the keyless remote simultaneously for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
5. To program additional remotes at this time, repeat step 4. This vehicle can have a maximum of eight remotes programmed.
6. To exit programming mode, turn the key off and remove it. Test the remote(s).

**For Vehicles without Driver Information Center Buttons:**

To access this display, the vehicle must be in Park (P) with the key in the ON position (as far as you can go without cranking the engine).

1. Press the trip odometer reset stem until “RELEARN REMOTE KEY” displays.
2. Press and hold the trip odometer reset stem for three seconds. The message “REMOTE KEY LEARNING ACTIVE” will display.
3. Press and hold the lock and unlock buttons on the first keyless remote simultaneously for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
4. To program additional remotes at this time, repeat step 3. This vehicle can have a maximum of eight remotes programmed.
5. To exit programming mode, turn the key off and remove it. Test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 GMC Yukon Denali