Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Dodge Journey

Step-by-Step Programming Instructions:

Adding a third transmitter to your system, provided you already have two working programmed transmitters:

1. **Prepare Existing Transmitters:** Ensure you have two functioning programmed transmitters ready. If you only have one, this procedure won’t work.

2. **Initiate Programming Mode:**
– Use the first programmed transmitter. Turn the ignition to the ON position for 3 seconds (but not longer than 15 seconds). Do not crank the engine. Turn the transmitter off and remove it.

3. **Add Second Transmitter:**
– Within 15 seconds, insert the second working programmed transmitter. Turn the ignition to the ON position (do not crank the engine). After 10 seconds, an acoustic signal will sound, and the immobilizer warning lamp will flash. Turn the transmitter off and remove it.

4. **Add Third Transmitter:**
– Within 60 seconds, insert the third new non-programmed transmitter into the ignition and turn it to the ON position (do not crank the engine). After 10 seconds, an acoustic signal will sound, and the immobilizer warning lamp will illuminate for 3 seconds.

5. **Finalize Programming:**
– Turn the transmitter to the OFF position and remove it.

6. **Test Transmitters:**
– Verify that all transmitters are functioning correctly. Repeat the procedure for additional transmitters if necessary. A maximum of 8 transmitters can be programmed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Dodge Journey