Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Mercury Sable

Step-by-Step Programming Instructions:

1. Ensure you have two previously programmed keys and the new unprogrammed key accessible. If you lack two previously programmed keys, you’ll need a locksmith to cut and program a second key for you.

2. Insert the first previously programmed key into the ignition.

3. Turn the ignition from off to on. Maintain the ignition on for at least three seconds, but no more than ten seconds.

4. Turn the ignition off and remove the first programmed key.

5. Within ten seconds of switching off the ignition, insert the second previously programmed key into the ignition.

6. Turn the ignition from off to on. Keep the ignition on for at least three seconds, but no more than ten seconds.

7. Turn the ignition off and remove the second previously programmed key.

8. Within ten seconds of switching off the ignition and removing the previously programmed key, insert the new unprogrammed key into the ignition.

9. Turn the ignition from off to on. Keep the ignition on for at least six seconds.

10. Remove the newly programmed key from the ignition. If the key has been successfully programmed, it will start the engine and operate the remote entry system (if it’s an integrated key head transmitter). If not successful, wait for ten seconds and repeat Steps 1 through 8.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Mercury Sable