Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Mazda CX 9

Step-by-Step Programming Instructions:

1. Begin by opening the driver’s side door and leaving it open.
2. Utilize the power door lock switch on the door to lock and then unlock the driver’s door.
3. Insert the key into the ignition.
4. Turn the key to the ON position and then back to the Lock (off) position three times within a span of 10 seconds. Keep the key in the ignition in the Lock (off) position.
5. Perform the action of closing and then opening the driver’s door three times, leaving the door open after this step.
6. The ECU should respond by locking and unlocking the doors once.
7. Press any button on remote #1 twice. The ECU will respond by locking and unlocking the car doors.
8. For additional remotes, repeat Step 7 for up to a total of three remotes.
9. Remove the key from the ignition, and the ECU will respond a final time with a series (about 4) of door locks and unlocks.

These instructions are for programming the key portion of the flipkey. Note that the key blade must be cut to operate the ignition. Timing is crucial; please read through the entire procedure before attempting.

Programming Instructions for a Smart Key:

This vehicle is not onboard programmable and requires a qualified professional to program smart key remote fobs.

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, consider driving to the locksmith to potentially save money.
3. The locksmith will then connect specialized computer equipment to your vehicle to program the smart key remote fob.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Mazda CX 9