Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Mazda 5

Step-by-Step Programming Instructions:

Remote Programming:
1. Sit in the vehicle and close all doors. Open the driver’s door and leave it open.
2. Within 24 seconds, insert the key into the ignition and turn it to the ON position and then OFF three times. Leave the key in the ignition. Then, close and open the driver’s door three times.
3. If done correctly, the doors will automatically lock and then unlock, indicating the vehicle is in programming mode. If the locks do not cycle, restart the procedure.
4. Press the unlock button twice on the first remote to be programmed. The door locks will cycle to indicate successful programming. If there’s only one remote, press any button twice on the same remote, wait for the locks to cycle, then press any button twice again. If there are two remotes, press any button on the second remote twice, wait for the locks to cycle, then press any button twice again on the second remote. To program three remotes, press a button twice on the second remote, wait for locks to cycle, then press any button twice on the third remote.
5. Programming is complete. Close the door and test the remotes to ensure proper programming.

Key Programming:
1. Insert a programmed (working) key into the ignition cylinder.
2. Turn the ignition cylinder ON (without cranking the engine) and back to OFF. The ignition should stay in the ON position for approximately 3 seconds until security light goes out.
3. Turn to the OFF position and remove the existing key.
4. Within 10 seconds, insert a second programmed (working) key and turn to ON and then back to OFF. Ignition must be on for at least 3 seconds until security light goes out.
5. Turn to OFF position and remove the existing key.
6. Insert the new (unprogrammed) key before twenty seconds have elapsed and turn to ON. Leave it in the ON position for at least 3 seconds and turn back to OFF.
7. The security light will light up for three seconds to indicate the new key has been successfully programmed.

If you don’t have two programmed keys, use LocateALocksmith.com to find a locksmith in your area.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Mazda 5