How to Program a 2008 Lincoln MKX Ignition Chip Key Transponder

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Lincoln MKX

Step-by-Step Programming Instructions:

To program spare Remote Head Keys, you’ll need two previously programmed keys and the new unprogrammed key within reach. If you lack two previously programmed keys, you’ll require a Locksmith to cut and program a second key. Alternatively, if you have one working key, you can acquire a Programmer and Key Here. Follow these steps:

1. Insert the first previously programmed key into the ignition.
2. Turn the ignition from off to on, ensuring it remains on for at least three seconds but no more than 10 seconds.
3. Turn the ignition off and remove the first programmed key.
4. After three seconds but within 10 seconds of turning the ignition off, insert the second previously programmed key into the ignition.
5. Turn the ignition from off to on, ensuring it stays on for at least three seconds but no more than 10 seconds.
6. Turn the ignition off and remove the second previously programmed key.
7. After three seconds but within 10 seconds of turning the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.
8. Turn the ignition from off to on, ensuring it stays on for at least six seconds.
9. Remove the newly programmed key from the ignition. If successfully programmed, it will start the engine and operate the remote entry system. If unsuccessful, wait 10 seconds and repeat Steps 1 through 8.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Lincoln MKX