Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Dodge Avenger

Step-by-Step Programming Instructions:

Note:To add a new key to the system, you need two valid keys. If you lack two working keys, a locksmith must program one for you. Follow these steps:

1. Insert the first valid key into the ignition switch. Turn the ignition switch to the ON/RUN position, ensuring it remains in this position for at least three seconds but no longer than 15 seconds. Then, switch the ignition to the LOCK position and remove the first key.

2. Next, insert the second valid key into the ignition switch. Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound, and the Vehicle Security Light will start flashing. Switch the ignition to the LOCK position and remove the second key.

3. Now, insert the new key into the ignition switch. Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound, and the Vehicle Security Light will stop flashing. Programming is complete when the Vehicle Security Light briefly turns on before turning off. Your new key is now programmed. Additionally, the Remote Keyless Entry transmitter will be programmed during this procedure. You can repeat this process to program up to eight keys.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Dodge Avenger