Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Cadillac STS

Step-by-Step Programming Instructions:

To pair a new transmitter with your vehicle using a recognized transmitter, follow these steps. Canadian owners require two recognized transmitters:

1. Ensure the vehicle is off.
2. Have the recognized transmitter and the new, unrecognized transmitter(s) with you.
3. Insert the vehicle key into the key lock cylinder located on the outside of the driver’s door.
4. Turn the key to the unlock position five times within five seconds.
5. The Driver Information Center (DIC) will display “READY FOR FOB #X,” where X can be 2, 3, or 4.
6. Place the new, unrecognized transmitter into the transmitter pocket with the transmitter buttons facing the front of the vehicle. The transmitter pocket is inside the console bin located between the driver and front passenger seat.
7. Once the transmitter is programmed, a beep will sound. The DIC will display “READY FOR #X,” where X can be 3 or 4, or “MAX # FOBS LEARNED.”
8. Remove the transmitter from the transmitter pocket and press the unlock button on the keyless access transmitter two times.

Programming Instructions without Recognized Transmitter:

For Canadian owners without a recognized transmitter, follow this procedure. United States owners can also use this method if a recognized transmitter is unavailable. This process requires three ten-minute cycles to complete:

1. Ensure the vehicle is off.
2. Place the new, unrecognized transmitter into the transmitter pocket with the transmitter buttons facing the front of the vehicle.
3. Insert the vehicle key into the key lock cylinder located on the driver’s door.
4. Turn the key to the unlock position five times within five seconds.
5. The DIC message will display “OFF-ACCESSORY TO LEARN.”
6. Press the OFF/ACC button (ignition switch).
7. The DIC will read “WAIT 10 MINUTES” and will count down to zero, one minute at a time.
8. The DIC will display “OFF-ACCESSORY TO LEARN” again.
9. Press the OFF/ACC button (ignition switch).
10. Repeat steps 7-9 twice more.
11. A beep will sound, and the DIC will read “READY FOR FOB #1.” All previously known transmitters are now erased.
12. Once the transmitter is recognized and programmed, a beep will sound, and the DIC will display “READY FOR FOB #2.”
13. Remove the keyless access transmitter and press the unlock button twice to initialize it.
14. Repeat this process for additional transmitters, up to four. The DIC will display “MAX # FOBS LEARNED” when complete.

After programming transmitters, press the unlock button on each keyless access transmitter twice. Previously programmed transmitters will no longer work and must be reprogrammed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2008 Cadillac STS