How to Program a 2007 Subaru Forester Keyless Entry Remote Key Fob

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Subaru Forester

Step-by-Step Programming Instructions:

Note: Up to four remote key fobs can be programmed at one time. Deactivate the alarm if fitted. Locate and record the remote ID number either from the package if new or by opening up the remote if used. There will be an 8-digit code that will be needed to program the remote.

1. Open the driver’s door, enter the vehicle, and close the driver’s door.
2. Within 15 seconds, turn the key to the ON position and then back to LOCK 10 times. An acoustic signal will be emitted once to indicate that the programming mode has been activated. Another continuous acoustic signal will follow, and the interior lamp will flash until programming is complete. Note: If an error occurs during programming, the acoustic signal will stop, the interior lamp will go out, and the programming will need to be restarted. Within 45 seconds:
3. Open and close the driver’s door. An acoustic signal will be emitted until the ID number is entered.
4. Press the LOCK button on the door panel the same number of times as the first digit on the remote ID code.
5. Once the digit has been entered, press the UNLOCK button on the door panel.
6. Repeat the procedure with each digit in the remote ID code, counting from left to right.
7. Repeat the programming procedure for the entire ID number a second time.
8. An acoustic signal will be emitted once to indicate programming is complete. Repeat the ID number entering procedure for any additional remotes to be programmed and test the remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Subaru Forester