404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2007 Saturn Relay Ignition Chip Key Transponder - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2007 Saturn Relay Ignition Chip Key Transponder

0
20

Compare
SKU: Saturn Relay 2007 Categories: , , , Tags: , ,

Description

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Saturn Relay

Step-by-Step Programming Instructions:

These programming steps are specifically designed for vehicles manufactured in the USA. Can I personally program a new key if I don’t have any working keys? Yes, once you’ve had the new key cut by a locksmith or another qualified professional, follow these instructions:

1. Insert the newly cut key into the ignition and turn it to the ON position for 10 minutes and 30 seconds.
2. Within 45 seconds, turn the key to OFF, then back to the ON position for another 10 minutes and 30 seconds.
3. Within 45 seconds, repeat the process of turning the key OFF and then back to the ON position for 10 minutes and 30 seconds.
4. Turn the key OFF, then back ON. The key is now programmed. Start the vehicle to test the key.

Can I program a duplicate key for this vehicle? Yes, once you’ve had the new key cut by a locksmith or another qualified professional, follow these instructions:

1. Insert an existing programmed working key into the ignition cylinder.
2. Turn the ignition to the ON position for 5 seconds, then back to the OFF position.
3. Remove the existing key and within 5 seconds, insert the new key and turn it to the ON position for 5 seconds.
4. Turn the key OFF, then back to ON. The key is now programmed. Start the vehicle to test the key.

Click Hereto purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Saturn Relay

Leave a reply

X
X