Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Nissan Murano

Step-by-Step Programming Instructions:

1. Begin by ensuring you have both the key and remote on hand. If your remote is integrated into the key, this procedure will only program the remote portion.

2. It’s crucial to gather all transmitters you intend to use with the vehicle before entering programming mode. Programming a new transmitter will erase any existing codes, rendering other transmitters non-functional until they are reprogrammed.

3. Start by closing and locking all doors using the driver’s side power lock/unlock switch.

4. Insert the key into the ignition and remove it at least six times within a span of 10 seconds. Successful completion of this step will be indicated by the hazard lamps flashing. Make sure to fully withdraw the key each time. If performed too quickly, the system may not enter programming mode.

5. Insert the key into the ignition cylinder and turn it to the ACC position. Within 5 seconds, press ANY button on the remote transmitter. The hazard lamps should flash to confirm successful synchronization. Be cautious not to press the button more than once in this step, as doing so could disrupt the programming procedure.

6. If there are additional transmitters to program (including existing ones), follow these steps: unlock and lock all doors using the driver’s side power lock/unlock switch, then within 5 seconds, press ANY button on the next remote. Repeat this process for each transmitter, including any existing ones.

7. Turn the key to the OFF position and remove it from the ignition. Then, unlock the doors using the driver’s side power lock/unlock switch and open the driver’s side door.

8. Even if your original key and remote were separate, you can upgrade to a key with built-in remote buttons following these instructions.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Nissan Murano