Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Mitsubishi Raider

Step-by-Step Programming Instructions:

To program the key for a transponder-equipped Raider, follow these steps:

**Key Programming:**

1. Insert the first programmed key into the ignition and turn it to the ON position. Wait for about 3 seconds, then switch it OFF and remove the key.
2. Within 15 seconds, insert the second programmed key into the ignition and turn it to ON. Wait around 10 seconds. You’ll notice the immobilizer warning light on the dashboard and hear an audible tone. Turn the ignition OFF and remove the key.
3. Within 50 seconds, insert the new unprogrammed key into the ignition and turn it to ON. After roughly 10 seconds, you’ll hear an audible tone, and the immobilizer light will stay lit for 3 seconds. This signals that programming is complete.
4. Repeat these steps for each additional key, beginning with step number 1.

**Remote Programming:**

1. Sit in the vehicle with all doors shut and the driver’s seat-belt fastened. Ensure no one else is inside.
2. Place the key in the ignition and turn it to the ON position.
3. Using a programmed key/remote transmitter, follow these steps:
– Press and hold the UNLOCK button.
– After holding it for at least 4 seconds, continue holding the UNLOCK button while also pressing the PANIC button within 6 seconds.
– Confirm an acoustic signal is emitted, indicating the programming mode is active. Release both buttons.
4. Within 60 seconds, follow this procedure for each remaining key/remote transmitter:
– Press both the LOCK and UNLOCK buttons simultaneously on the unprogrammed remote for 2 seconds, then release them.
– Confirm an acoustic signal is emitted.
– Within 4 seconds, press and release the UNLOCK button.
– Confirm an acoustic signal is emitted.
5. Repeat step 4 for each remaining key/remote transmitter, including working remotes.
6. Turn the ignition to the OFF position or wait 60 seconds to exit programming mode.
7. Programming is now complete. Test all remotes to ensure proper programming. Note: a maximum of 6 key remote transmitters can be programmed.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Mitsubishi Raider