How to Program a 2007 Mitsubishi Eclipse Ignition Chip Key Transponder

Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Mitsubishi Eclipse

Step-by-Step Programming Instructions:

Here’s a summarized version of the instructions for programming the ignition key and remote for vehicles with one or no keys:

Programming Ignition Key:
1. If you have two valid programmed keys and a blank key, you can program the new key.
2. Insert the first programmed key and turn the ignition to the “ON” position for 5 seconds.
3. Turn the ignition to the “LOCK” position and remove the first key.
4. Within 30 seconds, insert the second programmed key and turn it to the “ON” position. The immobilizer indicator will start blinking after about 10 seconds.
5. When the immobilizer indicator blinks, turn the second key to the “LOCK” position and remove it. Within 30 seconds, insert the blank cut key and turn it to the “ON” position.
6. Complete the process within 30 seconds of the immobilizer indicator blinking. The immobilizer indicator will come on for 3 seconds and then turn off if registration is successful. If an error occurs, the indicator will turn off during the procedure.
7. Repeat the process if you wish to program another key.

Programming Remote:
1. Locate the Data Port.
2. Insert keys in the ignition and leave them in the OFF position.
3. Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port with a suitable jumper wire, leaving the wire connected throughout the programming procedure.
4. Within 10 seconds of connecting the jumper wire, press the Hazard Switch 6 times. The doors will automatically lock and unlock once, indicating that the system is in programming mode.
5. Press the LOCK button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
6. Repeat step 5 with up to 4 remotes (including any existing remotes) within one minute. After each programming, the doors will lock and unlock once.
7. Disconnect the programming wire and remove the keys from the ignition.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Mitsubishi Eclipse